People hold horizontal safety ropes and set them in special parts of high-altitude work, such as suspended steel beams, frame connecting beams and so on. After the hoisting is in place, the construction personnel shall walk on it to maintain the balance of the center of gravity of the human body. People hold horizontal safety ropes and set them in special parts of high-altitude work, such as suspended steel beams, frame connecting beams and so on. After the hoisting is in place, the construction personnel shall walk on it to maintain the balance of the center of gravity of the human body.
The safety rope is woven with synthetic fiber. It is an auxiliary rope used to connect the safety belt. Its function is double protection to ensure safety. The general length is 2 meters, but also 2.5 meters, 3 meters, 5 meters, 10 meters and 15 meters. The safety rope above 5 meters is also used as the lifting rope.
(1) To tighten the belt, the waist buckle assembly must be fastened and aligned;
(2) When using the safety belt for hanging operation, the hook shall not be directly hooked on the safety belt rope, but on the hanging ring of the safety belt rope;
(3) It is forbidden to hang the safety belt on components that are not firm or with sharp corners;
(4) Use the same type of safety belt, and all parts cannot be replaced without authorization;
(5) The safety belt subject to severe impact cannot be used even if the appearance remains unchanged;
(6) It is forbidden to use safety belts to transfer heavy objects;
(7) The safety belt shall be hung at a firm and reliable place above, and the height shall not be lower than the waist.
